Lincoln Aviator: Body and Paint / Second Row Seats
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the front seat backrest.
Refer to: Front Seat Backrest (501-10A Front Seats, Removal and Installation)...
Overview
Heated Seats
If equipped with the heated seat system, the rear seat cushion and backrest can be heated at one of two levels on demand.
The components of the rear heated seat system include:
Seat cushion heater mat (LH/ RH)
Seat backrest heater mat (LH/ RH)
Heated seat module (attached to the underside of the RH second row seat cushion frame)
Heated seat switches (part of the RHVAC module located in the rear panel of the front floor console)
Heated/Ventilated Seats
If
equipped with the rear heated/ventilated seat system, the
heated/ventilated seat control buttons and indicators are located on the
RACM touchscreen...
Other information:
Overview
The AWD front suspension consists of the following components:
Front and rear lower arms
Rear lower arm ball joints
Stabilizer bar, bushings and links
Ride height sensors (Vehicles with Continuously Controlled Damping (CCD) Suspension)
Passive or dynamically controlled shock absorber and spring assembly (Continuously Controlled Damping (CCD))
Upper control arms
Wheel bearings and wheel hubs
Wheel knuckles
Wheel studs
The
front suspension uses a double ball joint short long arm suspension
system...
System Operation
Lane Keeping Alert and Lane Keeping Aid
Item
Description
1
Lane Keeping System Switch
2
IPMA
3
GWM
4
Camera Windshield Defrost Heater
5
RCM
6
SCCM
7
PCM
8
IPC
9
TRM
10
BCM
11
PSCM
12
with active cruise control
13
CCM
14
Windshield
Network Message Chart
Module Network Input Messages - IPMA
Broadcast Message
Originating Module
Message Purpose
Ambient air temperature filtered
PCM
Used to control the camera windshield defrost heater operation...