Lincoln Aviator: Electrical / Battery and Charging System
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Front Pedestrian Alert System Speaker
Remove the front bumper cover...
Other information:
System Operation
System Diagram - Push Button Ignition Switch
Item
Description
1
HS1-CAN
2
Ignition Switch (push button)
3
GWM
4
PCM
5
Ignition Mode Indicator
6
BCM
7
Run/Start Relay
Network Message Chart - Push Button Ignition Switch
GWM Module Network Input Messages
Broadcast Message
Originating Module
Message Purpose
Ignition status
BCM
This message informs the GWM of the current ignition status; off, run, start, unknown or invalid...
Leak detection
NOTE:
This test is meant to be a secondary check after a service
procedure is performed on the high voltage battery when a seal is
disturbed. It is important to follow the workshop manual service
procedure to verify a high voltage battery is sealed correctly...