Lincoln Aviator: Entertainment / AM/FM Radio
Tuning a Station
You can use the tune or seek controls on the
radio bezel to select a station.
To tune a station using the touchscreen,
select:

A pop up appears, allowing you to type in
the frequency of a station. You can only enter
a valid station for the source you are
currently listening to.
You can press the backspace button to
delete the previously entered number.
Once you have entered the station's call
numbers, you can select:

Presets
To set a new preset, tune to the station and
then press and hold one of the memory
preset buttons. The audio mutes briefly while
the system saves the station and then
returns.
You may be able to add additional preset
pages using the settings option on the
feature bar.
Note: This feature may not be available in
all markets and requires an active
subscription.
SiriusXM satellite radio is a
subscription-based satellite radio service that
broadcasts a variety of music, sports, news,
weather, traffic and entertainment
programming...
Other information:
Diagnostic Trouble Code (DTC) Chart
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).
Diagnostic Trouble Code Chart
Module
DTC
Description
Action
DDM
B118C:11
Left Blind Spot Warning Indicator: Circuit Short To Ground
GO to Pinpoint Test D
DDM
B118C:15
Left Blind Spot Warning Indicator: Circuit Short To Battery Or Open
GO to Pinpoint Test C
DDM
B118C:15
Left Blind Spot Warning Indicator: Circuit Short To Battery Or Open
GO to Pinpoint Test D
PDM
B118D:11
Right Blind Spot Warning Indicator: Circuit Short To Ground
GO to Pinpoint Test D
PDM
B118D:15
Right Blind Spot Warning Indicator: Circuit Short To Battery Or Open
GO to Pinpoint Test C
PDM
B118D:15
Right Blind Spot Warning Indicator: Circuit Short To Battery Or Open
GO to Pinpoint Test D
SODL
B11D6:11
Driver Display Alert LED: Circuit Short To Ground
GO to Pinpoint Test V
SODL
B11D6:15
Driver Display Alert LED: Circuit Short To Battery Or Open
GO to Pinpoint Test V
SODL
U0100:00
Lost Communication With ECM/PCM "A": No Sub Type Information
GO to Pinpoint Test G
SODL
U0101:00
Lost Communication with TCM: No Sub Type Information
GO to Pinpoint Test G
SODL
U0121:00
Lost Communication With Anti-Lock Brake System (ABS) Control Module "A": No Sub Type Information
GO to Pinpoint Test O
SODL
U0140:00
Lost Communication With Body Control Module: No Sub Type Information
GO to Pinpoint Test P
SODL
U0146:00
Lost Communication With Serial Data Gateway "A": No Sub Type Information
GO to Pinpoint Test H
SODL
U0151:00
Lost Communication With Restraints Control Module: No Sub Type Information
GO to Pinpoint Test Q
SODL
U0155:00
Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information
GO to Pinpoint Test R
SODL
U0199:00
Lost Communication With "Door Control Module A": No Sub Type Information
GO to Pinpoint Test I
SODL
U0232:00
Lost Communication With Side Obstacle Detection Control Module "A": No Sub Type Information
GO to Pinpoint Test S
SODL
U0232:87
Lost Communication With Side Obstacle Detection Control Module "A": Missing Message
GO to Pinpoint Test S
SODL
U0401:86
Invalid Data Received from ECM/PCM A: Signal Invalid
GO to Pinpoint Test M
SODL
U0402:86
Invalid Data Received from TCM: Signal Invalid
GO to Pinpoint Test M
SODL
U0415:86
Invalid Data Received from Anti-Lock Brake System (ABS) Control Module "A": Signal Invalid
GO to Pinpoint Test T
SODL
U049A:86
Invalid Data Received From "Door Control Module A": Signal Invalid
GO to Pinpoint Test M
SODL
U0533:62
Invalid Data Received From Side Obstacle Detection Control Module "A": Signal Compare Failure
GO to Pinpoint Test U
SODL
U2100:00
Initial Configuration Not Complete: No Sub Type Information
GO to Pinpoint Test N
SODL
U2101:00
Control Module Configuration Incompatible: No Sub Type Information
GO to Pinpoint Test N
SODL
U2300:55
Central Configuration: Not Configured
GO to Pinpoint Test N
SODL
U3000:44
Control Module: Data Memory Failure
GO to Pinpoint Test K
SODL
U3000:45
Control Module: Program Memory Failure
GO to Pinpoint Test K
SODL
U3000:46
Control Module: Calibration/Parameter Memory Failure
GO to Pinpoint Test K
SODL
U3000:49
Control Module: Internal Electronic Failure
GO to Pinpoint Test K
SODL
U3002:62
Vehicle Identification Number: Signal Compare Failure
GO to Pinpoint Test N
SODR
B11D6:11
Driver Display Alert LED: Circuit Short To Ground
GO to Pinpoint Test V
SODR
B11D6:15
Driver Display Alert LED: Circuit Short To Battery Or Open
GO to Pinpoint Test V
SODR
U0100:00
Lost Communication With ECM/PCM "A": No Sub Type Information
GO to Pinpoint Test G
SODR
U0101:00
Lost Communication with TCM: No Sub Type Information
GO to Pinpoint Test G
SODR
U0121:00
Lost Communication With Anti-Lock Brake System (ABS) Control Module "A": No Sub Type Information
GO to Pinpoint Test O
SODR
U0140:00
Lost Communication With Body Control Module: No Sub Type Information
GO to Pinpoint Test P
SODR
U0146:00
Lost Communication With Serial Data Gateway "A": No Sub Type Information
GO to Pinpoint Test H
SODR
U0151:00
Lost Communication With Restraints Control Module: No Sub Type Information
GO to Pinpoint Test Q
SODR
U0155:00
Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information
GO to Pinpoint Test R
SODR
U0200:00
Lost Communication With "Door Control Module B": No Sub Type Information
GO to Pinpoint Test J
SODR
U0233:00
Lost Communication With Side Obstacle Detection Control Module "B": No Sub Type Information
GO to Pinpoint Test S
SODR
U0233:87
Lost Communication With Side Obstacle Detection Control Module "B": Missing Message
GO to Pinpoint Test S
SODR
U0401:86
Invalid Data Received from ECM/PCM A: Signal Invalid
GO to Pinpoint Test M
SODR
U0402:86
Invalid Data Received from TCM: Signal Invalid
GO to Pinpoint Test M
SODR
U0415:86
Invalid Data Received from Anti-Lock Brake System (ABS) Control Module "A": Signal Invalid
GO to Pinpoint Test T
SODR
U0501:86
Invalid Data Received From "Door Control Module B": Signal Invalid
GO to Pinpoint Test M
SODR
U0534:62
Invalid Data Received From Side Obstacle Detection Control Module "B": Signal Compare Failure
GO to Pinpoint Test U
SODR
U2100:00
Initial Configuration Not Complete: No Sub Type Information
GO to Pinpoint Test N
SODR
U2101:00
Control Module Configuration Incompatible: No Sub Type Information
GO to Pinpoint Test N
SODR
U2300:55
Central Configuration: Not configured
GO to Pinpoint Test N
SODR
U3000:44
Control Module: Data Memory Failure
GO to Pinpoint Test K
SODR
U3000:45
Control Module: Program Memory Failure
GO to Pinpoint Test K
SODR
U3000:46
Control Module: Calibration/Parameter Memory Failure
GO to Pinpoint Test K
SODR
U3000:49
Control Module: Internal Electronic Failure
GO to Pinpoint Test K
SODR
U3002:62
Vehicle Identification Number: Signal Compare Failure
GO to Pinpoint Test N
Global Customer Symptom Code (GCSC) Chart
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices...
DTC Chart(s)
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).
IPMA
DTC Chart
DTC
Description
Action
B120C:11
Heater for Windshield Mounted Sensor: Circuit Short To Ground
GO to Pinpoint Test C
B120C:13
Heater for Windshield Mounted Sensor: Circuit Open
GO to Pinpoint Test C
B13A6:14
Lane Departure Warning (LDW) Switch Input: Circuit Short To Ground or Open
GO to Pinpoint Test A
C0072:00
Brake Temperature Too High: No Sub Type Information
This DTC sets when the CCM
receives a brake over temperature message from the brake system...