Lincoln Aviator: Parking Aid - Vehicles With: Active Park Assist / Specifications
General Specifications - Front
Item
|
Specification
|
Active park assist sensor azimuth system check object position 1 (P1) distance from sensor
|
50 cm (20 in) ± 10 cm (4 in)
|
Active park assist sensor azimuth system check
object position 2 (P2) and position 3 (P3) distance from sensor
|
391 cm (154 in) ± 20 cm (8 in)
|
General Specifications - Rear
Item
|
Specification
|
Active park assist sensor azimuth system check object position 4 (P4) distance from sensor
|
25 cm (10 in)
|
Active park assist sensor azimuth system check
object position 5 (P5) and position 6 (P6) distance from sensor
|
150 cm (59 in)
|
Other information:
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the wheel bearing and wheel hub.
Refer to: Wheel Bearing and Wheel Hub (204-02 Rear Suspension, Removal and Installation).
Remove the 3 bolts and the brake disc shield...
Diagnostic Trouble Code (DTC) Chart
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).
Diagnostic Trouble Code Chart
Module
DTC
Description
Action
BCMC
U0100:87
Lost Communication With ECM/PCM "A": Missing Message
GO to Pinpoint Test A
BCMC
U0111:87
Lost Communication With Battery Energy Control Module "A": Missing Message
GO to Pinpoint Test B
BCMC
U0140:87
Lost Communication With Body Control Module: Missing Message
GO to Pinpoint Test C
BCMC
U0164:87
Lost Communication With HVAC Control Module: Missing Message
GO to Pinpoint Test D
BCMC
U024D:87
Lost Communication With "Seat Control Module J": Missing Message
GO to Pinpoint Test E
BCMC
U0293:87
Lost Communication With Hybrid/EV Powertrain Control Module: Missing Message
GO to Pinpoint Test F
BCMC
U1000:00
Solid State Driver Protection Active: Driver Disabled: No Sub Type Information
GO to Pinpoint Test G
BCMC
U2100:00
Initial Configuration Not Complete: No Sub Type Information
GO to Pinpoint Test H
BCMC
U2200:00
Control Module Configuration Memory Corrupt: No Sub Type Information
GO to Pinpoint Test H
BCMC
U3000:49
Control Module: Internal Electronic Failure
GO to Pinpoint Test I
BCMC
U3003:16
Battery Voltage: Circuit Voltage Below Threshold
GO to Pinpoint Test J
BCMC
U3003:17
Battery Voltage: Circuit Voltage Above Threshold
GO to Pinpoint Test K
Pinpoint Tests
PINPOINT TEST A : U0100:87
Refer to Wiring Diagrams Cell 14 for schematic and connector information...